| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | Sheet Extruder |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Extrusion line summary | |
| Driving power supply: | 380V/3phase/60HZ |
| Suitable for raw material: | PP granulation or recycling |
| Max. width: | 1220mm*2 |
| Thickness: | 20mm |
| Max. extrusion capacity: | 800kg/h Final products 500kg/h |
| Speed: | 0.15M-1.5M / Min |
| Compressed air capacity: | 1M3 / h, 0.5-0.7Mpa |
| Power consumption | Estimated 600kw Final real is around 480kw |
| Cooling water recycling: | 10M3 / h; 25ºC, 15CMB pool |
| Noisy: | Less than 75dB |
| YRφ150/35 Exhaust Single screw extruder | |
| Screw and barrel material | 38CrMoAlA(YINTAI) |
| nitriding depth | 0.5mm-0.7mm |
| Screw hardness | ≥960HV |
| Barrel hardness | ≥1100HV |
| Screw diameter | ø150mm |
| Screw L/D | 35:1 |
| Speed | ≥90rpm/min |
| Barrel heating zone | ≥8zones |
| Heating power | 60KW |
| Heating | Ceramic heating ring/ Stainless steel heat preservation cover |
| Cooling | Fan cooling |
| Power | 370W/set |
| Motor power | 200kw |
| Motor speed | 1500rpm |
| Speed governor | ABB |
| Mold | |
| Mold effective width | 2500mm |
| Mold material | 5CrNiMo |
| Control way of mould lip | mold lip with pull type mechanical micro adjust structure; bottom lip fixed, |
| Cooling bracket | |
| Structure | Square tube |
| Stacker | |
| Electrical control system | |
| Cabinet | vertical |
| Control panel | PLC & SIMNES TOUCH SCREEN |
OVERSEAS:
){kind=link}