| After-sales Service: | Yes |
|---|---|
| Warranty: | 15 Month |
| Type: | Sheet Extruder |
|
Still deciding? Get samples of US$ 160000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Driving power supply | 380V/3phase/50HZ or 380V/3phase/60HZ |
| Suitable for raw material: | PMMA/PC/ABS/HIPS/GPPS |
| Speed | 38m/min |
| Compressed air capacity | 2M3 / h, 0.5-0.7Mpa |
| Cooling water recycling | 8M3 / h; 20ºC |
| Max. width: | can be customized |
| Dosing unit--single screw extruder --Plate hydraulic screen changer--Melt pump--Mold(T-DIE)--Three rollers calender machine--Oil temperature control system--Cooling bracket--Edge cutting knife holder device--Two sides protective film adhesive unit--Longitudinal-sawing unit--Belt delivery | |
| Screw and barrel material : 38CrMoAlA | |
| nitriding depth: 0.5mm-0.7mm | |
| Screw hardness: ≥960HV | |
| Barrel hardness: ≥1100HV | |
| Screw diameter: ø120 --ø130-- ø150-- ø180 | |
| Motor Siemens | |
| Speed governor: ABB | |
| Exhaust vacuum system: INDENPENDENCE DESIGN AND DEVELOPMENT |
 |
45 incline |
| Roll surface roughness: Mirror polish Ra≤0.015um, super mirror | |
| Roller raw materials: 42CrMo | |
| Stacker: Rigid steel | |
| Roll drive: 3 independent gear motor |
|
Cooling bracket length: 12m |
| Double-side protective film adhesive unit | |
| Four rollers haul off machine | |
| Delivery table or Robot |
){kind=link}